NEW Listed! Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End

Once again, best product from Apollo Valve. Complete your home today with Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End. it will make your home greater. We found that Apollo Valve offer Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End with the best price on the market.

Features

• Made of bronze for higher strength and corrosion resistance than brass
• Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use
• 200 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 125 psig for steam working pressure (SWP)
• Solder end connections on both ends for a semi-permanent connection to a piping system
• Top-mounted iron hand wheel for lowering and lifting the gate

Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder Ends indentation is designed well and attach to the house comfortably. As you might imagine, Apollo Valve sees more than just the obvious products benefit. Read on to see what we discovered in Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End

Key Pros and Cons! Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End from Apollo Valve

Product Description

This class 125 Apollo Valve 102S series bronze gate valve has a non-rising stem and solder end connections on both ends. The bronze body, solid wedge gate, and screw-in bonnet provide higher strength and resistance to corrosion than brass. This valve has a non-rising stem that stays fixed in place when the gate is raised or lowered for low clearance or underground use, and the graphite internal packing helps prevent the valves stem from leaking. This gate valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 200 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 125 psig for steam working pressure (SWP), and it has a temperature range of -20 degrees F to 406 degrees F. It has solder end connections on both ends for a semi-permanent connection to a piping system. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism which lifts and lowers the gate to start and stop the flow between the connected pipes. This valve comes with a five-year warranty for workmanship and material defects. The class 125 valve meets Manufacturers Standardization Society (MSS) SP-80 standards for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is appropriate for use in plumbing, heating, and building service piping systems.

Gate valves control flow in a piping system by lifting a gate out of the path of steam, fluids, or gases. They are designed to block or permit flow, as the vibrations and force of flow repeatedly striking a partly lowered gate can damage the gate and seats. To accommodate different flows and pressure requirements, gates come in four types: solid wedge (appropriate for almost all liquid service), flexible wedge (appropriate for steam service), split wedge (appropriate for normal temperature, non-condensing gas and liquid service, including corrosive service), and parallel disc (appropriate for high and low pressure applications). Hand wheels or levers activate the screw mechanism in the valves bonnet, which comes in various designs, to open and close the gate. Union bonnets are preferable for building service piping, threaded-in (or screw-in) bonnets work well for lighter-duty usage, and bolted body-bonnet connections are used primarily in iron multi-turn valves. Most gate valves have either a rising stem, which moves up and down with the gate, or a non-rising stem, which remains fixed in place. When closed, the gate and its seats form tight planar sealing surfaces, ideal for linear liquid flow. Gate valves are used in air, gas, liquid, and steam applications.

Conbraco Industries, Inc. manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices under the Apollo Valves brand. The company, founded in 1928 and headquartered in Matthews,

Apollo Valve Quality Assurance: Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End

What a nice looking from Apollo Valve. We really like the Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End , and we were full of praise when we reviewed it.

Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End - Apollo Valve Product warranty!

Is the Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End a worthwhile purchase? For this great price, the Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End comes widely respected and is a popular choice amongst lots of people. The Apollo 102S Series Bronze Gate Valve, Class 125, Non-Rising Stem, Solder End is actually pretty good according to most reviewers. Press the button below to see the best deals and more user reviews.

List Price:
Deals Price: Too Low To Display